Personal ATV Maintenance Guide Under High Temperature
Personal ATV Maintenance Guide Under High Temperature
High temperature and sandy terrain easily cause overheating, belt burnout and component wear of ATVs. Here is the simple and practical personal maintenance guide.
Before riding, check the coolant level and clean the dust and silt on the radiator to ensure heat dissipation. Use full synthetic high-temperature engine oil and shorten the oil change cycle properly. Clean the air filter to guarantee smooth air intake. Adjust the tire pressure slightly lower than the standard to prevent high-temperature tire burst. Inspect the brake fluid and brake pads, and clean the brake caliper silt. Clear dust inside the CVT transmission box and keep vents unobstructed to avoid belt burning. Polish battery terminals and do not fill the fuel tank full to reserve thermal expansion space.
During riding, avoid long-time high throttle driving and in-situ high revving. Stop and cool down every 30 minutes under heavy load or climbing conditions. If the temperature warning light turns on, stop and cool down immediately. Never flush hot engine, brakes and tires with cold water to prevent component cracking.
After riding, wait for the vehicle to cool down completely before flushing silt with low-pressure water, especially the transmission box and brake system. Dry and lubricate the chain with high-temperature chain wax. Regularly grease suspension bearings and check aging fuel pipes and circuits. For long-term parking, place the ATV in shade, jack up the tires and disconnect the battery negative pole.
分享
推荐文章
-
Wheel Speed / Vehicle Speed Sensor (Hall Effect, Most Common) ATV Wheel Speed Sensor Working Principle: A magnetic toothed ring is installed on the wheel hub or transmission output shaft. The Hall probe senses alternating magnetic field changes, generating one pulse signal for each tooth passing by as the wheel rotates. The pulse frequency corresponds to the vehicle speed. Signals are sent to the instrument cluster to display speed and mileage. The ABS system detects wheel lock-up by comparing speed differences between the four wheels and activates anti-lock braking accordingly. This sensor has no mechanical contact points, features waterproof and sand-resistant performance, and is suitable for harsh off-road operating conditions. -
Why You Should Choose OEM Parts for Your ATV ATVs (All-Terrain Vehicles) operate in far harsher conditions than ordinary road vehicles. They regularly tackle rough trails, muddy terrain, steep slopes, and heavy vibrations, which place extreme stress on every mechanical and electrical component. In such demanding working environments, choosing genuine OEM (Original Equipment Manufacturer) parts instead of cheap aftermarket alternatives is never an unnecessary luxury, but a practical and safe choice for long-term vehicle maintenance. The most fundamental advantage of OEM parts is their perfect factory-matched compatibility. Designed and produced simultaneously with the original ATV model, every OEM component strictly follows official specifications in size, tolerance, hole position, angle, and sealing standards. They can be installed directly wi...
-
How to Find ATV Parts as an Overseas Buyer First, collect full vehicle info: VIN, year and model. Take photos of broken parts and measure sizes to get the OEM part number from the official parts catalog for accurate matching. Check local suppliers first. Visit authorized dealers for genuine factory parts or local repair shops & salvage yards for affordable used second-hand assemblies you can inspect in person. Shop online next. Buy standard aftermarket parts on local motor sites or eBay for second-hand components with fitment guarantees. If no matching parts exist, replace standard items like bearings and brake pads by size. Post wanted ads in ATV forums or rider groups to buy pre-owned spare parts from other enthusiasts. For special custom brackets or gears, contact suppliers for custom m...
